AXIOMTEK AX10445 Series, Руководство пользователя

Страница: 3 / 58

iii
ESD Precautions
Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic
discharge, observe the following precautions:
n
Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
n
Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This helps to
discharge any static electricity on your body.
n
Wear a wrist-grounding strap, available from most electronic
component stores, when handling boards and components.
Unpacking
After unpacking the CPU card, check and see if the following
items are included and in good condition. If any of the items
is missing or damaged, notify your dealer immediately.
The AX10445A/A+ Isolated Dual Channel RS422/485 Interface
Module package includes the following:
n
AX10445A or A Board
n
Screw 3mm (x4)
n
Bronze standoffs 6mm (x4)
n
AS59099 DAC Driver CD
The AX10445B/B+ Isolated Dual Channel RS422/485 Interface
Module package includes the following:
n
AX10445B or A Board
n
Screw 3mm (x4)
n
Bronze standoffs 6mm (x4)
n
AS59099 DAC Driver CD
Make sure that all of the items listed above are present.