AXIOMTEK AIE800-904-FL Series, Руководство пользователя

Страница: 27 / 34

AIE800-904-FL Series U
ser’s Manual
Jumper & Connector Settings 19
3.3.1 PoE Power Output Connector (M12 X-Code 8 pos Female)
This is a power connector for the internal PoE board. It complies with IEEE 802.3at
standard via an internal cable connected to the LAN port on an SBC to power an
external PoE device.
3.3.2 USB 2.0 Connector (C3 Type 4 pos Female)
The USB (Universal Serial Bus) connectors are compliant with USB 2.0 (480Mbps),
ideal for installing USB peripherals such as the keyboard, mouse, scanner, etc.
Pin Signal
1 USB_PWR3
2 USB_PN6
3 USB_PP6
4 GND
3.3.3 AC Power Jack Connector (M12 S-Code 4 pos Male)
This is an AC power jack connector. Firmly insert the power cable into this connector.
To prevent system instability caused by loose connection, make sure all components
/
devices are properly installed before connect ing.
Pin Signal
1 Line
2 NC
3 Neutral
4 PE/GND
Pin Signal Pin Signal
L1 MDI0P L5 MDI2P
L2 MDI0N L6 MDI2N
L3 MDI1P L7 MDI3P
L4 MDI1N L8 MDI3N