5. Operation notes
•
Please don’t operate this product unless the manual has been read and proper training has been completed.
•
“ ”will appear, when the battery is low.
•
Don’t immerse the unit into water, which will result in electric shock and damage.
•
Only while the product is assembled well, the camera head is water-proof, but the handheld display isn’t
fully water-proof.
•
Don’t use the product if condensation forms inside the camera head.
•
If the tool couldn’t work well after turning it on. Please take the battery out. It is dangerous, wait until it is
repaired.
•
Store idle product out of reach of children and other untrained persons. The tool is dangerous in the hands
of untrained users.
•
Maintain the inspection tool with care. If the tool is dropped, check for the breakage ,which may affect
the tool’s operation. If it is damaged, have the tools serviced before using. Many accidents are caused by
poorly maintained tool.
•
Dry your hands before turning the tool ON or OFF.
•
Protect against excessive heat. The product should be put away from heat sources, such as radiators�heat
registers�stoves or other products (including amplifiers) that produce heat. Don’t use the tool near moving
machinery or areas where the temperature is exceed 45°C.
•
Put on the camera protector and store the probe in the unit after operation.
•
Store the product in ventilated and dry places.
6. Specification
Name: Palm Scope
Model: AX-B180
Recommended use: Indoor
Viewable angle:60°
Focal length: 50mm
Visible distance: 2.5cm-30cm
Diameter of camera head: Φ9mm
Probe length: About 60cm
Image display: 2.7″TFT/LCD
LCD resolution: 320×240 pixels
