4
Unpacking and Inspection
The packing should include the following items:
1
DC power supply
2
Power line cord
3
Instruction manual
4
Spare fuse
Please check to see that all of the above items are included.
Safety Precautions
1.
Before applying power to your DC power supply, make sure that power select switch is correctly
setting for your applicable AC power supply.
2.
Connect the instrument to an AC power source using the power line core provided.
3.
Do not connect a voltage that is greater than the current output voltage to the terminals of the
instrument.
4.
Never ground yourself when taking electrical measurements. Keep your body isolated from
ground by using dry clothing; rubber shoes, rubber mat or any approved insulating material.
5.
Never touch exposed wiring, connections or any live circuit when attempting to take
measurements
6.
Avoid shorting circuit the output of DC power supply.
7.
Set the voltage and current adjustment knobs as you desire.
8.
The unit should be stored in a dry and well ventilated place and the power cord removed if
storing for long periods.
Safety Information
The DC power supply series has been designed according to IEC1010 – 1 concerning safety
requirements for electrical measuring instruments with an overvoltage category (300V CAT II) and
pollution 2.
Safety Symbols
Important safety information, refer to the operating manual.
DC – Direct current.
