axiome axm 960, Руководство пользователя

Страница: 35 / 47

axm960
User manual Presentation
23/02/11
Page 35
AXIOME
7.6.3 Thickness trim
The below operation can be done only during a maintenance service and by trained technicians. To test the thickness switch, documents of around 1/10
mm in thickness should be used. This is usually the case with 80g/m2 paper.
The displayed value must be situated between 30 and 50. Doing new calibration request a brand new document without fold. When calibration is passed,
differents values are given.
Keymean: Average thickness value on document
Peak: Maximal thickness value
Trim: New trim value
In this results, the Peak value must be less than 15% upper the Keymean value. If results are not answering this needs, contact Axiome Alpha SA.