Axiom SW212Al, Руководство пользователя

Страница: 7 / 16

7
I/O AND CONTROL OPERATIONS
MAINS IN
Powercon® NAC3FXWTOP power inlet connector. To switch the amplifier on, insert the Powercon® connector and turn it clockwise into the
ON position. To switch the amplifier off, pull back the switch on the connector and turn it counter-clockwise into the POWER OFF position.
MAINS OUT
Powercon® NAC3MXWTOP power outlet connector. This is connected in parallel with the MAINS IN. It is suited to link the supply of
another SW212A loudspeaker or other system for a maximum absorption of 9A.
WARNINGS:
• Connect no more than one SW212A subwoofer unit to the MAINS OUT connector.
• Turn on each subwoofer unit one a time starting from the latest unit.
• In the case of product failure or fuse replacement, disconnect the unit completely from the mains power.
• Use a suitable power cable and mains plug to build the power cable, it must only be connected to a socket
corresponding to the specifications indicated on the amplifier unit. See assembly instruction downloadable from
NEUTRIK WEB site at: http://www.neutrik.com/
ON
This LED indicates power on status.
PROT
This red LED lights when the amplifier module is in protect mode for an internal fault and, consequently, the amplifier is muted.
SIGN LIMIT
This LED lights in green to indicate the presence of the signal and lights in red when an internal limiter reduces the input level.
INPUT
Audio signal input with locking XLR connector. It has a fully electronically balanced circuitry including AD conversion for the best
S/N ratio and input headroom.