Axiom STAR, Руководство по эксплуатации

Страница: 7 / 28

Engines/Helm
THROTTLE
Setting Neutral Throttle for Starting
Confirm that the throttle is in neutral
position.
Turn the key to second click –
Beep will sound. VesselView will
power up.
Everything is ready to start.
Turn key to start then release key.
If the engine fails to start on its
own, wait 30 seconds and try again.
Insure throttle only indicator
is solid red, then control will
engage. If blinking, press to
throttle only button to make
solid light.
GETTING UNDER WAY
From Neutral Throttle
Red light on controls will be
solid.
Push throttle lever forward to go
forward or pull back for reverse.
Advance throttle to increase
speed.
Always pause in neutral before
changing gears.
Shut Down
Return throttles to neutral position.
Turn engine keys to off the engine
will no longer be running.
FLYING BRIDGE CONTROLS
Operation from Upper Deck
To get power to the upper deck controls:
Helm Transfer – WARNING:
Avoid serious injury or death from loss
of boat control. The boat operator
should never leave the active station
while engine is in gear. Helm transfer
should only be attempted while the
engine is in neutral and both stations
are manned.
NOTE: Neutral position is preferred
when doing a station transfer. If
conditions do not allow the remote
control to be placed in the neutral
position, a helm transfer can be
done while in gear. The helm
transfer function allows the boat
operator to select which helm is in
control of engine operation. Pressing
the "TRANSFER" button two times
allows engine control to be
transferred to a new helm. When a
helm transfer is initiated, the control
will automatically start adjusting
engine RPM and gear position to
match the control handle setting at
the new helm. Adjust the control
handles to the desired throttle and
gear.
O.05 ENGINE - 3