Axiom SBC8156, Руководство пользователя

Страница: 65 / 96

SBC8156 Pentium All-in-One CPU Card Series User’s Manual
Award BIOS Utility
9,
z
KBC input clock
This item sets the input clock for the keyboard controller. The default
value is “8 MHz” .
z
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the system board and you wish to use it. If you install an
add-in FDC or the system has no floppy drive, select Disabled in this
field. The default value is
“Enabled”
.
z Onboard Serial port 1/2
Select an address and corresponding interrupt for the first and second
serial ports. The default values are “3F8/IRQ4” for Onboard Serial Port
1 and “2F8/IRQ3” for Onboard Serial Port 2.
z UART Mode Select
The second serial port offers these infrared interface modes:
1.
IrDA
2.
ASKIR IrDA-compliant serial infrared port
3.
Normal (default value)
NOTE:
The UART Mode Select will not appear on the
menu once you disable the setting of Onboard
Serial Port 2.
%0<5 /0/?<0
<440 <
z Onboard Parallel Port
Select a logical LPT port name and matching address for the physical
parallel (printer) port. The default value is
“378/IRQ7” .
NOTE:
Choosing Disabled for this option will remove the
Parallel Port Mode option on the menu.
z Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port. Select
Normal unless your hardware and software require one of the other
modes offered in this field. The default value is
“SPP” .
NOTE:
Selecting EPP on this option will allow selection to
the EPP Mode (EPP1.7, EPP1.9)
ECP mode selection will provide option for ECP
Mode Use DMA.
Choosing ECP+EPP modes will provide selections
for both EPP Mode Select and ECP Mode Use DMA.