REAR PANEL
INPUT -
Power input for the external amplifier. The ED150P includes a passive crossover for filtering the signal,
it includes also an internal protection that limit for excessive power on the HF section and if the signal persists
for a long time period it excludes the HF section. The connections are the following:
INPUT - LINK
NL4 pin number internal connection
1+
+
1-
-
2+
none (pass thru)
2-
none (pass thru)
LINK -
Power output in parallel with the INPUT socket for connecting the unit to another speaker.
The number of ED150P cabinets that can be connected in parallel depends on the amplifier load capacity.
HORN ORIENTATION
For a correct horn orientation see the following examples:
KPTED150B WALL or TRUSS MOUNTING
Using the “C” shape bracket the ED150P loudspeaker can be mounted to walls or truss combining
it with two PLH300:
It allows to aim the speaker in one direction (vertical or horizontal) in 15 steps (-70°,-55°,-40°,-
30°,-25°,-15°,-10°,0°,+10°,+15°,+25°,+30°,+40°,+55°, +70°).
wide dispersion
short throw
HORIZONTAL POSITION
STAGE MONITOR CONFIGURATION
Tight dispersion
long throw
HORIZONTAL POSITION
FOH CONFIGURATION
wide dispersion
short throw
Tight dispersion
long throw
VERTICAL POSITION
FOH CONFIGURATION
Tight dispersion
long throw
wide
dispersion
short throw
1
3
4
1
1
1
2
3
4