USER MANUAL
ED150P
passive point source loudspeaker
KEY FEATURES
• Near-field and mid-field sound reinforcement applications
• High quality, low distortion drivers
• Asymmetric HF coverage pattern
• Audiophile-grade passive crossover network
• Rotatable HF Horn for optimal horizontal coverage
• 35° monitor taper
• Water-repellent treatment of LF loudspeaker
• Various rigging hardware
INTRODUCTION
ED point source systems are designed for indoor and outdoor sound reinforcement applications
ranging from clubs, bars and restaurants to theatres, live music venues, houses of worship and theme
environments. Passive ED series loudspeaker systems are easy to set up and simple to operate.
The ED150P consists of an 15” LF drive unit and a 1.4” HF compression driver loaded by an
asymmetric HF horn in a compact enclosure, designed for many multi-purpose sound reinforcement
activities. The asymmetric HF coverage pattern, varying from 100° horizontal in the lower part of the
horn for more effective near field coverage, and narrowing to 60° horizontal at the top of the horn for
more focused coverage in the far field. The result is more accurate coverage of a typical auditorium
than is possible with a fixed horizontal coverage device. The HF horn is also rotatable through 90°
by simply removing four screws and realigning the horn, so that coverage can also be optimised for
stage monitor use. This rotatable horn feature also makes it possible to maintain the ideal coverage
pattern when the cabinet is installed in a horizontal (landscape) orientation. Its asymmetric dispersion
pattern provides optimal coverage of typical rectangular venues, with wider dispersion at the front
and narrower dispersion at the rear.
This versatile loudspeaker can also be used as a low profile stage monitor with its 35° tapered side,
and in this situation the HF horn can be rotated to maintain the best coverage pattern for performers
both near to and further away from the monitor. ED150P cabinet is an unobtrusive and compact
format designed for a multitude of near field applications such as theatre under-balcony fill, stage
front fill, delay speaker, bar and restaurant audio, and discreet stage monitor. A pole mount socket
make this a very versatile loudspeaker in both portable and permanently installed applications.
TECHNICAL SPECIFICATION
Acoustical
LF Power Compression
@ -10 dB Power (136 W) = 1 dB
@ -3 dB Power (680 W) = 2.8 dB
@ 0 dB Power (1360 W) = 4 dB
System type
Point Source Loudspeaker
with asymetric HF Horn
Connectors
Low frequency transducer
15” (300 mm), 3” (75 mm) ISV aluminium
voice coil, 8Ω
Connector Type
Neutrik® Speakon® NL4 x 2
Input Wiring
Pin 1+/1- (Pin 2+/2- pass thru)
High frequency transducer
1.4” (35.5 mm) compression driver, 2.4”
(60 mm) aluminium voice coil, Titanium
diaphragm, 8Ω
Mechanical
Width
450 mm (17.7”)
Height
765 mm (30.1”)
Frequency response
50 Hz – 17 kHz (-6dB)
Depth
400 mm (15.8”)
Sensitivity (2.83 V @ 1m, 2 Pi)
97 dBSPL
Taper angle
Stage Monitor: 35° - Frontfill: 7.5°
Horizontal Coverage Angle
60 to 100° (-6 dB)
Construction
15mm, reinforced phenolic birch
Vertical Coverage Angle
60°, 1KHz to 17KHz (-6dB)
Paint
High resistance, water based paint
Maximum Peak SPL @ 1m
128 dB
Suspension system
Electrical
Suspension
M10 Rigging points
Nominal Impedance
8 Ω
or dedicated metal bracket
Minimum Impedance
6.1 Ω @ 200Hz
Net Weight
30kg (66.1 lb)
Power Handling (AES)
680 W
Power Handling (prgm)
1360 W
revision 2018-08-09
h100°
h60°