A795 User Guide: Programming Supplement
Chapter 4: Programming commands
61
Select or cancel white/black reverse print mode
ASCII
GS B n
Hexadecimal
1D 42 n
Decimal
29 66 n
Value of n:
0 = Off
1 = On
(When 0 and 1 are the least
significant bit, LSB)
Range of n:
0-255
Default:
0 (Off )
Turns on white/black reverse print mode. In white/black
reverse print mode, print dots and non-print dots are
reversed, which means that white characters are printed
on a black background. When the white/black reverse print
mode is selected it is also applied to character spacing
which is set by right-side character spacing (1B 20).
This command can be used with built-in characters and
user-defined characters, but does not affect the space
between lines.
White/black reverse print mode does not affect bit image,
downloaded bit image, bar code, HRI characters, and
spacing skipped by horizontal tab (09), set absolute
starting position (1B 24 …), and set relative print
position (1B 5C).
White/black reverse print mode has a higher priority than
underline mode. When underline mode is on and white/
black reverse print mode is selected, underline mode is
disabled, but not canceled.
Bar codes, logos, and bit images are not affected by this
command.
Exceptions
Only the lowest bit of n is valid.
Related information
If the current color is not black and 2-color paper is
loaded, no visible effect takes place.
In A793 emulation, the command is unrecognized and the
parameter byte is put into the print buffer.
Select or cancel smoothing mode
ASCII
GS b n
Hexadecimal
1D 62 n
Decimal
29 98 n
Value of n
Hex. 30 smoothing disabled
Value of m
Hex. 31 smoothing enabled
Effects of smoothing are most effective on large
charactors, (Select character size command 1D 21 xx.)
Reverse color text mode (ColorPOS™)
ASCII
GS 0x85 m n
Hexadecimal
1D 85 m n
Decimal
29 133 m n
Value of m:
0 = white
1 = black
2 = paper color
Value of n:
0 = white
1 = black
2 = paper color
Default:
m = 0 (off )
Sets a mode for reverse printing effects on text. The
background color is specified by m, while the text color is
specified by n. Setting m = 0 turns off the mode.
If m = n but not zero, the printer produces solid printing in
the given color. This tactic can be used to minimize the
firmware busy work.
The value of current color and white/black reserve print
mode is superceded by the value of n whenever this mode
is on (m>0).
Bar codes, logos, and bit images are not affected by this
command.
Содержание A795
