A795 User Guide: Programming Supplement
Chapter 2: Diagnostics and Configuration
16
Configuring the printer
The configuration menu allows you to select functions or change various settings for the printer.
Instructions printed on the receipt guide you through the processes.
Caution: Be extremely careful changing any of the printer settings to avoid changing
other settings that might affect the performance of the printer.
Connector
Cover Open
Off
Switch 1 & 2 are
shown in the
normal OFF position
On
DIP Switches
1 2
1 2
1 2
1 2
1 2
1
Open the connector cover.
2
Set DIP Switch 1 to ON position (down). DIP Switch 2
should be in the OFF position (up).
Paper Feed
Button
Receipt
Cover
3
Make sure receipt paper is loaded in the printer before
proceeding. (For loading instrrctions, see the A795
User Guide.)
4
Cycle DIP switch 2 down (reset ON position), then up
(normal OFF position).
- or -
Press and hold the paper feed button while closing the
receipt cover, continually holding the paper feed button
until the configuration printout begins.
•
The printer beeps, prints the diagnostics form and
the configuration main menu.
•
The printer pauses and waits for a main menu
selection to be made (see sample printout).
*********
*********
MAIN MENU
MAIN MENU
**********
**********
*******************************
*******************************
Select a sub-menu :
- EXIT
-> 1 click
- Print Current Configuration
-> 2 clicks
- Set Communication Interface
-> 3 clicks
- Set Diagnostics Modes
-> 4 clicks
- Set Emulation/Software Options -> 5 clicks
- Set Hardware Options
-> 9 clicks
Enter code, than hold Button DOWN
at least 1 second to validate
5
To communicate with the printer, you will press the
paper feed button using either short or long clicks.
Use a long click (more than one second) for “yes” and
a short click for a “no.” Follow the printed instuctions
to make selections.
6
Continue through your menu selections until you are
asked, “Save New Parameters?”. Select “Yes” or “No.”
a
If you wish to save, select “Yes,” then return DIP
switch 1 to the OFF Postion (up).
b
. Open the receipt cover.
Press and hold the paper feed button while closing
the receipt cover.
•
The diagnostic printout verifies your new
settings.
7
If you would like to continue configuring the printer,
select “No.” The printer then returns to the
configuration menu, where you can set parameters
again.
Содержание A795
