Testing the Printer
The Configuration Menu allows you to set general printer parameters.
The test prints a list of various printer settings and partially cuts the
paper if a knife is installed. The test printout may vary depending on
the printer model. To change the default settings, enter the Configuration
Menu as instructed on the bottom of the test printout. The printout may
be useful to a service representative if there is a problem. If something
appears to be wrong with the test printout (such as missing or faded
text), additional troubleshooting and diagnostic guides are available
by calling 1-607-274-2424.
Front
Cover
Slip In
LED (Green)
Slip or
Check
Extended
Slip Table
Receipt
Receipt
Cover
Front of Printer
Reset
Button
Front Cover
On-Line,
Paper Status,
Error LED (Green)
Paper Feed
Button
7
September 1999
6
A758 Setup Guide
