axing SAT-Navi SZU 21-00, Руководство по эксплуатации

Страница: 11 / 16

Operation Instructions SZU 21-00
Chapter 4: Update
24.07.12 © AXING AG • Reserving change in design and type - We cannot be held liable for printing errors
11
4.4 Updating the satellite and transponder data
To transfer the changed satellite and transponder data to the SAT-Navi SZU 21-00, the SZU 21-00 must
be updated to the current firmware version serial _1.0.95 or a newer version.
The new satellite and transponder data are installed on the SZU 21-00 by means of the
Satfinder
Resource Upgrade software.
Î
Connect the PC and the SZU 21-00 to the programming set SZU 22-00 (see 4.1 on page 9).
Î
Switch on the SAT-Navi and select Update in the main menu.
Under the menu item "Update", menu items Update ALL and Update Resources will appear.
Î For a satellite and transponder data update, select Update Resources and press OK to confirm.
Î Double-click Satfinder Serial.exe to start the program on the PC .
Î
Select the correct COM port in the Port field and open the smg folder by pressing the Open button.
Î
Select the romimageSatfinder.bin file and click Send .
The satellite and transponder lists are transferred. The progress is shown in the lower part of the window.
Do not switch off the device during the writing process!
Note
Fig. 17: Update menu of the
SZU 21-00
Fig. 18: Display of the Satfinder
Serial.exe on the PC
Fig. 19: Display during the file
transfer
Note
Fig. 20: The file was transferred
successfully