axing SAT-Navi SZU 21-00, Руководство по эксплуатации

Страница: 10 / 16

Operation Instructions SZU 21-00
Chapter 4: Update
10
© AXING AG • Reserving change in design and type - We cannot be held liable for printing errors 24.07.12
4.3 Firmware update
Î
Connect the PC and the SZU 21-00 to the programming set SZU 22-00 (see 4.1 on page 9).
Î
Switch on the SAT-Navi and select Update in the main menu.
Under the menu item Update , the menu items Update ALL and Update Resources will appear.
Î For a firmware update, select Update ALL and press OK to confirm.
Î Double-click serial _1.0.95.exe (it can be a newer version) to start it on the PC and select the COM
port that is connected to the SAT-Navi.
If you don’t know which COM port is used, you can find the right COM port under Windows in the
Device Manager.
Î Click Send button in the update program on the PC to start the transmission.
The SAT-Navi starts the download, which may take a few minutes. After that, the software is written to
the internal flash memory.
Do not switch off the device during the writing process!
The display will show the message "The STB is up-to-date!" .
Problems that may arise during the firmware update
An update failure may be caused by the following reasons:
7.
Communication between the SAT-Navi and the update application has failed.
Î
Check the connection and verify whether the right COM port is used.
8. The update is made with a version of the software that is already installed on the SAT-Navi.
In this case, the display will show the message "The STB is up-to-date!".
Fig. 14: Update menu
Note
Note
Fig. 15: Time out
Fig. 16: Update cancelled