axing RFO-845, Руководство по эксплуатации

Страница: 18 / 33

Operation instructions | Serie RFQ-845 and Serie RFO-845
3.3.2. DVB-C, DVB-T or DVB-T2 (for multi tuner modules)
 Select any tuner by the help of the buttons
Tuner 1…4
.
 Before connecting an antenna cable to an according tuner, the LNB Power has to be set to off
 Enter the center frequency (see table below) for the receiving channel into the field FREQ (MHz).
Note: All other entry
fields are not relevant.
Modulation and all other
important parameter for
reception are detected
automatically.
Channel Input Channel Input Channel Input Channel Input
S 21 306 21 474 41 634 61 794
S 22 314 22 482 42 642 62 802
S 23 322 23 490 43 650 63 810
S 24 330 24 498 44 658 64 818
S 25 338 25 506 45 666 65 826
S 26 346 26 514 46 674 66 834
S 27 354 27 522 47 682 67 842
S 28 362 28 530 48 690 68 850
S 29 370 29 538 49 698 69 858
S 30 378 30 546 50 706
S 31 386 31 554 51 714
S 32 394 32 562 52 722
S 33 402 33 570 53 730
S 34 410 34 578 54 738
S 35 418 35 586 55 746
S 36 426 36 594 56 754
S 37 434 37 602 57 762
S 38 442 38 610 58 770
S 39 450 39 618 59 778
S 40 458 40 626 60 786
S 41 466
Note : The center frequeny of channels using a bandwith of 7MHz will be rounded down to 3 full digits.
For example: center frequency of CH 5 = 177,5 MHz, the according input = 177.
3.3.3. Bit error rate
The BIT ERROR RATE is shown in the middle area. The amount of bit errors for the last 1,000,000 transferred
bits is calculated.
182016-10-31 | Technical changes, design modifications, errors and misprints are subject to change without prior notice.
Enter 3- digits for
center frequency
Choose “Off”