Field of application:
The devices are only suitable for in-house distribution of RF signals! If the
device is used for other purposes, no warranty is given!
With the cascading units 8 SAT IF polarization levels including terrestrial
signals (e.g. FM radio) can be distributed to several SAT receivers.
SPU 996-09 = 6 receivers
SPU 998-09 = 8 receivers
SPU 9912-09 = 12 receivers
SPU 9918-09/-19 = 18 receivers
RF-Installation:
Note:
For a cascading system with the cascade units SPU 996-09, SPU 998-
09, SPU 9912-09 or SPU 9918-09/-19 you need a multiswitch SPU 96-09,
910-09 or
916-09 or a head amplifier SVS 990-09. Please note when installing these
multiswitches or head amplifier the appropriate operation instructions.
4
Connect the outputs of the multiswitch to the inputs of the cascade
unit. Use F/F Quickfix adapters CFA 4-01 (not included in delivery).
Using adapters you can easily plug the devices on each other (see
figure 1 to 3).
4
If you use several cascade units, connect the outputs of the first cascade
unit to the inputs of the next cascade unit and so on. Note: According
to the dimensions of your SAT system, you may have to use after some
cascade units a further multiswitch to amplify the trunk signals (4).
4
Terminate the outputs of the last cascade unit with the resistors CFA
11-00 you find in the carton box of the multiswitch (5).
4
Connect the receiver outputs on the left and right sides to the antenna
sockets. Use highly shielded coaxial cables with F connectors. Suitable
cables and connectors can be found in the current AXING catalogue or
under www.axing.com.
Mounting:
Use the included mounting screws and the mounting holes of the devices (6).
4
Important:
Please make sure, that possible standards (EN 60728-11)
and safety regulations regarding electrical grounding must be kept.We
would therefore recommend to use QEW Earthing angles.
1
2
3
4
6
5
