2020-11-13 | Technical improvements, changes in design, printing- and other errors expected.
17
3.2.
Front page
3.2.1.
Input
The data rate of the IPTV- input ist shown.
If the CAS interface is used as a redundant IPTV input and the MIE has switched to this input, this is displayed
on the front page (CAS port used).
3.2.2.
Outputs
The fill level of all modulators is shown. 100% modulator fill level correspond to the maximal net data rate of
the output channel.
If the current fill level exceeds the maximal fill level, it may cause image disturbances, e.g. mosaic images.
The data rates of the programmes are not constant. They are dynamically changed by the sender. To ensure an
undisturbed reception, a reserve must absolutely be observed.
We recommend you to set the maximal fill level to 90%.
From a fill level of 99%, this is indicated in red.
The number of chosen programmes and the configuration of the modulators have an influence to the fill level.
