A verification report may be saved in .csv, .pdf, .html or .txt formats. Additionally
reports can be manually saved for subsequent printing or else printed without
saving.
Use the
File
tab from the pull-down menu and then select
Save Report
.
Options will then be given for the various report saving options and you can then
select between these as required.
If you want the report to be automatically opened on creation (for example, if
there is a need to print the report) then tick the
open report
box.
For some file types you may wish to save data to a single file and append the data
rather than replacing the previous data – for example when saving data to a .csv
file.
In this case the
Append Report
box should be ticked. If this is left unticked and the
same file name as previous is specified then the data will be overwritten.
After a successful decode of a barcode, the results can be saved to a file in special
form of .png format). This is done by using the
File/Save as
function. These results
can be reviewed at some later stage and shared with others.
When a saved scan is opened by the application, the original data is available and
displayed. In addition, the original image can also be re-verified using the
verify
button – this will then automatically use any plugins that are activated (such as CIP
or serialisation validation) regardless of whether the plugins were used at the time
of original verification.
To open a saved scan, use the
File
option from the pull-down menu and then
select
Load Scan
. Select the file to be viewed and re-verified. The .png file is then
displayed in the viewing area. The user should then press the
Verify
button.
The full verification information is then shown and can be viewed (and additionally
printed) as required.
Saving and printing
www.axicon.com
Page 20 of 28
Axicon Auto ID Limited | 15000 series verifier user guide | June 2017
