27
Stay Mode
Occasionally you may want to alarm only a certain part of your house, and this can be
achieved by using Stay mode. Please note that Zone 4 will only be triggered when
using stay mode.
In Stay mode, you can activate your alarm so that any motion in zones one, two or three
will not trigger the alarm, but if there is any movement in zone four then the alarm will be
triggered. In Stay mode you can choose whether the device emits a beep or stays
silent when the alarm is triggered. To activate Stay mode enter the following:
*#
→
password
→
01->Stay Key
Stay Beep Mode
*#->password->02->Stay Key
Stay Silent Mode
Remote Arming
You can also arm the AX52R remotely via SMS. To do this the mobile number that you
use will need to be programmed as one of the three SMS numbers. To arm the AX52R
by SMS you will simply need to send a text message saying ‘Arm Alarm’ to the number
that corresponds to the UIM that is placed in the AX52R.
