21
4.7 Adding / Removing Motion Sensors
To add motion sensors to the AX52R please follow the instructions below. Up to 64
Motion sensors can be added across 4 zones.
*#
→
password
→
71
→
Func Key Trigger the sensor that you want to put in zone1
*#
→
password
→
72
→
Func Key Trigger the sensor that you want to put in zone2
*#
→
password
→
73
→
Func Key Trigger the sensor that you want to put in zone3
*#
→
password
→
74
→
Func Key Trigger the sensor that you want to put in zone4
Please note that you need to trigger the desired sensor within 30 seconds so that it
registers correctly within the desired zone.
To add additional sensors in your desired zone please repeat the instructions above.
You can have up to 16 sensors per zone.
To remove the motion sensors please follow the instructions below.
*#
→
password
→
81
→
Func Key zone1
