2
REAR PANEL FUNCTION LAYOUT
1
2. REMOTE CONTROL FUNCTION
1. SPECIFICATIONS
14
13
12
11
10
9
8
7
6
5
4
3
2
1
19
18
17
16
15
1
2
3
4
5
6
7
8
9
10
11
12” Bluetooth Trolley LED Speaker
1.5” Tweeter
10M Bluetooth range
Brilliant LED lights
TF card slot, AUX and USB input
FM Radio function
Microphone input
Wireless microphone Included
Echo/Bass Adjustments
400W (PMPO) Output power
7.4V/3600mAh battery capacity
9V/1.5A Charge
Small remote control included
Frequency Response: 50Hz-20kHz
TO CUSTOMERS
Thank you for your support and trust on purchasing the products of our company. To fully
exert the function of the product, we suggest you to read the operating instruction carefully
before using it, for the convenience of grasping the connection method and using points.
Please take care of the operating instruction after reading it for the purpose of further
reference.
1. LED Lights Power Button: Press this button to turn on and off the front LEDs
2. Insert Microphone to front panel MIC jack, adjust MIC Vol and Echo to best level
3. AUX input: Connect your smartphone, mp3 player, laptop or other audio device to
this input
4. Microphone Priority: when the microphone priority is activated, speaking into the MIC will
automatically lower the other audio signal 20db. When the two speakers are switched to
bluetooth mode, press the TWS function button on any Axess device for 3-5 seconds to
begin the TWS matching state, then the two speakers will be automatically paired and
connected. When the is heard, the matching is successful, and the LED screen has
a display prompt.
5. Mode Selector / Recording: Press this button to switch between USB, TF and Bluetooth
inputs. Press and hold for 3-5 seconds to begin recording onto the USB drive or TF card
6. Repeat Track: Tap this button to single tune repeat
7. Previous Track / Previous FM Station (CH-): When using the speaker in USB/TF card &
bluetooth mode, press this button to go to the previous track. When using the speaker in
FM mode, press this button to go to the prevoius stored FM station
8. Play/Pause & FM Scan: Press this button to pause the signal from the USB flash drive
TF card or bluetooth inputs. When using the speaker in FM mode, press this button to
auto scan for all available stations. Each station will be stored. Press the CH+ and Ch -
to choose a station.
1. Power Switch: Press this switch turn on and off the speaker
2. Mode Selector: Press this button tot switch between USB, TF, FM
and bluetooth inputs
3. Repeat Track: tap this button to single tuen repeat
4. EQ mode switching
5. Previous FM Station (CH-): When using the speaker in FM mode, press
this button to got to the previous stored FM station
6. Next FM Station (CH+); When using the speaker in FM mode press this
button to go to the next stored FM station
7. Previous Track: when using the speaker in USB/TF card & bluetooth
mode, press this button to go to the previous track.
8. Next Track: when using the speaker in USB/TF card & bluetooth mode,
press this button to go to the previous track.
9. Pause & FM scan: Press this button to pause the signal from the USB
drive TF Card or Bluetooth inputs. When using the speaker in FM mode,
press this button to auto scan for all available stations.
10. VOLUME -
11.
12. Number buttons (0-9)
