12. Next Track/ Next FM Station (CH+): Bluetooth mode, press this button to go to the
next track. When using the speaker in FM mode, press this button to go to the next
stored FM station.
13. Play/Pause & FM Scan: Press this button to pause the signal from the USB flash drive
TF card or Bluetooth Inputs. When using the speaker in FM Mode, press this button to
auto scan for all available stations. Each station will be stored. Press the CH+ and CH-
to choose a station.
14. Previous Track/ Previous FM Station (CH-): When using the speaker in USB/TF card &
Bluetooth mode, press this button to go to the previous track. When using the speaker in
FM mode, press this button to go to the previous stored FM station.
15. Insert the microphone and insert a USB disk or TF card. Press and hold the REC button
on the rear panel for 3-5 seconds to enter the recording. To stop recording, press and
hold the REC button for 3-5 seconds. The recording file is saved in the USB flash drive
or TF card. Recorded files can be deleted on your computer.
16. Mode Selector: Press this button to switch between USB/TF/FM and bluetooth inputs
TWS: press TWS button for 3 seconds for bluetooth pairing mode
17. USB/TF Display screen: the elapsed time and format will appear on this display screen for
the USB/TF card inputs.
18. (EQ) Equalizer; optimize music up and down adjustment, high-medium-low frequency
19. FM Antenna: for best results fully extend the antenna
20. RCA Input: connect to CD/DVD, mp3 player, laptop or other audio source devices
21. Insert the guitar into the front panel guitar jack adn adjust the guitar volume to the optimal level
22. Insert Microphone to front panel MIC jac, adjust MIC VOL and Echo to best level
23. LED Lights Power Button: Press this button to turn on and off the front LEDs
24. Power Switch: P
ress this
switch turn on and off the speakers. Before powering on the speaker
make sure the volume levels are turned down to prevent damage to amplifier or speakers
25. Charging Port: Plug the power cord into the AC110-240V input port to charge the battery
When people sleep, they need a quiet environment.
Please turn off music or turn off the power while sleeping.
Prompt
This symbol indicates to user that the machine
with risk of electric shock
This symbol indicates to user that the machine
with important operation and maintenance
instruction
GENERAL OPERATION OF WIRELESS MICROPHONE
• Insert batteries into the wireless microphone
• Turn power switch on microphone to “ON”
• Please extend the antenna on the speaker and make it vertically upward for better reception.
• Adjust the microphone volume knob on the speaker to desired volume
• Ensure wireless microphones are operated within a 30m range of the speaker
• Keep 5-15cm distances between microphone and lips for best performance
• LED indicator on microphone will turn red when power level is low,
please replace with new battery
• Only use the included wireless microphone in the speaker package.
GENERAL OPERATION OF WIRED MICROPHONE
• Insert the wired microphone to “MIC IN”
• Turn power switch on microphone to “ON”.
• Adjust the microphone volume knob on the speaker to desire volume.
GENERAL OPERATION OF BLUETOOTH MODE
• Turn the speaker to ON and press the mode button to enter “Bluetooth” mode
• Turn ON your smartphone / tablet device’s Bluetooth connectivity and
search for device named “PABT6037”
• Click on device to connect “PABT6037”
• When Bluetooth connection is established, the speaker will announce “Bluetooth Mode”
is successfully connected
• Play music on your smartphone / tablet device and audio will be streamed to the speaker
• Ensure your smartphone / tablet device is compatible with Bluetooth A2DP audio profile
• You may use the MP3 player panel button to navigate the Bluetooth music
Key: Press this button to play/pause the music.
VOL-key: Press for previous music.
VOL+ key: Press for next music.
GENERAL OPERATION OF FM RADIO FUNCTION
ATTENTION
• Turn the speaker to ON and press the mode button to enter “FM” mode
• When the speaker will announce “Radio mode” to indicate successful connection.
Key: Press this button to “auto scan” the stations.
VOL-key: Press for previous station.
VOL+ key: Press for next station.
• For first time use fully charge the device until the light indicator on the control panel turns off.
• This can take up to approximmately 8 hours to fully charge. If you don’t, the device will
not function at full capacity.
