Axess-tel PG530, Инструкция по эксплуатации

Страница: 10 / 31

9
(keep on pressing it for several seconds)
5. * key
At the off-hook state, it's equivalent to number key when you input the dial number.
6. # input mode key
At the on-hook state, it's equivalent to number key when you input the dial number. If
you press it long time you can get 'P'.
Press this key to switch among different input mode.
7.
Call out the number you had dialed immediately.
8.
Arrow keys
:
¾ – ▲ / ▼ : When the user is in the inbox or writing a message, this key will allow to
move up and down
¾ In standby mode, press ▲ key, you could view the dialed numbers list. Press ▼
key ,you could view the received numbers list.
¾
◄ VOL-
/
► VOL+
: When the user is in the inbox or writing a message this key
allows to move right and left. You can scroll down or up the Ring volume during
idle mode and audio volume during conversation with this key.
9. REDIAL
Press it to redial the last dialed number in the standby mode or Hand-free mode.
10. CLEAR
You can delete the character before the current cursor in the EDIT mode when you press
it, and you can delete all the character when you press and hold this key.
11. Speaker
In the standby mode, press this key and dial the number when you see the vision
'dial please'. You can communicate with the other even if you haven't lifted up the
handset. In the same time, you can adjust the volume. Press this key again you
could end the communication.
12. ON/OFF
After the AC adapter or battery have been installed properly, Turn on the power switch,
and then keep on pressing the "
" key for about 3 seconds, the backlight will lit
automatically.
13. SMS
Press the key to enter the SMS menu.