Axess-tel MV510, Руководство пользователя

Страница: 18 / 56

MV500V SERIES (
VER. STD 0.6)
17
supply into an empty power outlet.
1.5 Switch on the Modem. Look at the Power LED on top of the Modem and
make sure the lights are ON.
1.6 Wait for a few seconds while the Modem searches for network service.
When the Modem finds a suitable network, the Signal LED turns to Red,
Violet or Blue depending on the strength of the acquired signal. Refer to the
Signal Strength LED description for more details.
Step 2
│
Preparing Your PC
Your Modem’s Ethernet is configured with DHCP by default. This means that IP
address of your PC is automatically assigned by the Modem. Make sure that your
PC has the correct TCP/IP setting for its "Local Area Connection" by following the
steps below.
2.1 Click "Start", select "Connect To",
Scroll down to "Show all
connections" and left-click it.
2.2 Right-click "Local Area
Connection", Scroll down to
"Properties" and left-click it.