AXEM Technology
11 rue Auguste Perret, 94042 Créteil, FRANCE – [email protected] – +33 (0)1 41 94 11 85 – www.axemtec.com
Siret : 45071140300045 - APE : 4652Z - RCS : CRETEIL 450711403 - N° TVA intracom : FR05450711403 - Capital : 500 000,00 €
File : 20190517_S-8800_&M-2900_User_guide.docx S-
8800 M 2900
Version : V1.0
13/27
Method NO.1: Real-time Mode
1. Click Tag Inventory (Real Time Mode). Select the connected antenna(s) port. Set the number of
Repeat per command, which is the times of repeat inventory command. For example, inventory
command will execute anti-collision algorithm one time when you set the value to 1. It will execute
anti-collision algorithm two times when you set the value to 2...
2. Click
Inventory
, you will find that the EPC number is uploaded immediately and it is real-time
updating. The reader will keep inventory unless you click
stop
as shown below:
Inventoried Quantity
Total number of inventory tags since click on
Inventory Tag
.
Speed
Speed of identification Tag, unit: piece / sec
Total Tag Communication
Total return EPC data of tags (Including repeated data)
Command Duration
Time of each Inventory Command takes, unit: ms
Total Inventory Duration
Total elapsed time since click on
Inventory Tag
, unit: ms.
ID
The serial number of data.
EPC
EPC number of tag.
PC
Protocol Control word of tag.
Identification Count
Times of tag identified.
RSSI
The signal strength when tag was identified at the last time.
Carrier Frequency
Carrier Frequency of tag which is identified at the last time.
