Ste
p
2,
Assemble lower front beam
Parts
Parts from step 1
1x “171211” (lower front horizontal beam)
4x Bolt M10 x 70 mm
4x M10 nut
2:1, Assemble the parts
2:2, Attach the nuts loosely by hand
2:1
4:1
4:2
5:1
5:2
5:3
3:1
3:2
3:3
2:2
Ste
p
4,
Assemble the lower rails
Parts
Parts from step 3
2x “20011” (fixed rail)
8x Bolt M10 x 70 mm
8x M10 nut
4:1, Assemble the parts
4:2, Attach the nuts loosely by hand
Ste
p
5,
Put the bike rack on its side and tighten all the nuts
Parts
Parts from step 4
5:1, Put the bike rack on its side
5:2, Tighten all the nuts
5:3, Set the bike rack upright again
6 - 3
6 - 4
2
Ste
p
3,
Assemble upper beam
Parts
Parts from step 2
1x “20152”(upper horizontal beam)
4x Bolt M10 x 110 mm
4x M10 nut
3:1, Assemble the parts
3:2, Check that the upper beam is tilting “backwards” (2° )
3:3, Attach the nuts loosely by hand
AXELENT SAFE-X AB · BOX 1 · KÄVSJÖVÄGEN 17 · SE-335 04 HILLERSTORP, SWEDEN
TEL: +46 370 37 34 60 · [email protected] · WWW.AXELENTSAFEX.SE
