Axel MAX MKII, Руководство пользователя, Страница: 26 / 78

ENG
| STREAMER MAX
– GENERAL DESCRIPTION
26
N° CONTROL NAME FUNCTION
1
POWER SUPPLY UNIT
The power supply unit features a switch to switch on the device and a power socket. For the change of the
fuse, see the relevant chapter. The fuse is located inside the device, near the switching power supply unit. The
fuse is of the slow blow type, 230 V a.c. and 2,000 A, equal to 2000 mA
2
“USB” PORT
USB -A type data communication port. This port is used to connect devices as Serial
– USB converter, or
certified USB UMTS modem sim card base.
3
ETHERNET PORT
Streamer MAX is fitted with an Rj45 Ethernet port for LAN/WAN-type connections, to monitor and control the
device. This port also provides an integrated web server, so the Streamer MAX can be controlled remotely
using a standard web browser. The same port also features an SNMP agent, and an ASCII Parser (
see
Appendix ).
4
“DIGITAL” UNIT
This section contains the connections for AES / EBU digital outputs. Electronically balanced
5
“DIGITAL/ANALOG” UNIT
This female connector allows two function. When the analog output it’s selected, this connector is the Left
input for Analog in. When Digital it’s selected this connector it’s the Digital Audio Input on AES/EBU format.
6
“ANALOG” INPUT
Analog Right input over XLR balanced connector
7
“ANALOG” OUTPUT
ANALOG audio output of the Streamer MAX. Electronically balanced output on XLR connector (type: stereo /
mono)
8
“GPIO” PORT
9pin female interface on SubD connector. This shows the logic status of the Streamer MAX. The GP outputs
are Open Collector outputs, while the GP inputs are optocouplers.
For information on the GPIO Interface port
pinout , see the A ppendix at the end of this manual. For the
operation of each GPI and GPO, see the specific section in the next pages of this manual.