Axcera CHV400BTD, Техническое руководство

Страница: 27 / 87

Innovator CHV400BTD ATSC Transmitter Initial On Site
Turn On Procedure
Technical Manual, Rev. 0 23
Splash Screen Number 2
The second splash screen indicates the Firmware and Version Numbers of the software used
in the system. The example shown is Firmware number 1312423: Version number 4.2/2.4.
The final screen is the RF Power default screen which indicates the Forward Power and
Reflected Power for the system.
The following screens are scrolled through using the buttons to the right of the display. Pushing
and releasing the Up & Down Arrows will scroll you through the Main Menus, which are shown
on the following pages aligned on the left side of the page. The Submenus of the Main Menus
are accessed by pushing and releasing the ENTER button. Once in the Submenus, pushing and
releasing the Up & Down Arrows will scroll you through the submenus of the Submenus. The
Submenus are shown on the following pages indented under the Main Menus and the submenus
of the Submenus are indented under the Submenu in which they are contained. In the SET UP
Menus, changes are made to the display by Pushing and releasing the ENTER button which
causes the item to be changed to blink, then using the left and right arrow buttons to display
the desired changed item, finally, pushing the ENTER button will accept the changes made upon
exit of the Set Up Menu.
NOTE: An example of accessing and changing an item using the Set Up Menus is as follows.
This procedure is to set the Off Air Receive Channel to the desired channel. Push and
release the DOWN Arrow button until the SYSTEM SET UP Main Menu is displayed.
Push and release the ENTER button. The Authorization Warning screen is displayed.
Push and release the ENTER button again and the ENTER BUTTON SETS TO CHANGE
MODE screen is displayed. Push and release the ENTER button again and the first set
up menu, which is the SET UP MENUS OF CHASSIS VALUES screen is displayed. Push
and release the DOWN Arrow button until the SET UP 8VSB DEMODULATOR screen is
displayed. Push and release the ENTER button to display the submenus under the SET
UP 8VSB DEMODULATOR menu. Push and release the DOWN Arrow until the 8VSB
DEMODULATOR USE OFF AIR CHxx is displayed. Push and release the ENTER button
and the XX, which indicates the Channel Number, will blink. Push and release the UP
or DOWN Arrow button until the desired new channel number is displayed. Push and
release the ENTER button, and the PUSH ENTER TO ACCEPT CHANGES menu is
displayed. Push and release the ENTER button again to accept the changes made.
The channel is now changed. Push and release the LEFT Arrow to exit to the SET UP
8VSB DEMODULATOR screen. Push and release the LEFT Arrow again to exit to the
SYSTEM SET UP Main Menu. Push and release the UP or DOWN arrows to browse the
main menus.
Left/Right Buttons
Enter Button
Up/Down Buttons