2
There is a variety of building wall surfaces; Awntech does not supply the hardware to install your awning.
You will need to purchase installation hardware at your local hardware store. We have advised you on
different surface applications below:
CONCRETE BLOCK WALLS:
(1)1/2” masonry bit with a 3/8” shank, (4-5) 5/16”X3” Masonry anchor
bolts, 9/16” socket.
METAL BUILDINGS:
(1) 2X6X8 #2YP Cut into 12” blocks for the back side of the metal, (4-5)
5/16”x4” lag bolts, (4-5) 5/16” washer and 3/8” drill bit. Bolt through the washer, the bracket and
the metal into wood blocks behind the metal.
ANY TYPE OF SIDING:
(4-5) ¼”x4” toggle bolts, (4-5) ¼” washers, (1) Flat head screwdriver, (1) ½” drill
bit (or if you hit a stud) ; (5-8) 5/16”X4” lag bolts, (4-5) 5/16” washers, (1) 3/16” drill bit and a 9/16” socket.
CONCRETE, BRICK OR STONE:
(1) ½” Masonry bit with a 3/8” shank, (4-5) 5/16”x3” masonry anchor
bolts, (4) 5/16”X4” bushings, 9/16” sockets. You will also need a roll of weather stripping.
Stucco:
(4-5) ¼”X4” toggle bolts, (4-5) ¼” washers, (1) flat head screwdriver, (1) ½” drill bit (or if you hit a
stud): (4) 5/16”X4” lag bolts, (4-5) 5/16” washers, (1) 3/16” drill bit and a 9/16” socket.
PARTS:
Parts List
Center Ribs & Wall
Supports
Size
Plates
Ribs
(R)
Top
Bar
(TB)
Front
Bar
(FB)
Left
Projection
Curve
(LPR)
Right
Projection
Curve
(RPR)
RC22
CC33
CC44
3
1
7
1
1
0
0
0
4-5
2
8
1
1
1
1
0
0
0
6-7
2
8
1
1
1
1
1-1
0
0
8
2
8
1
1
1
1
2-2
0
0
9
2
8
1
1
1
1
3-3
1-1
0
10
2
8
1
1
1
1
3-3
3-3
0
11-12
2
8
1
1
1
1
5-5
3-3
1-1
13-16
2
8
1
1
1
1
5-5
5-5
3-3
Custom
Other parts: Z-Brackets, Self-tapping Screws, 1/1/2” Bolts, Nuts
Tools Required:
Electrical Drill, ¼” Nut Driver Bit, Full Socket Set, Full set of Steel and
Masonry Bits, Tape Measure, Safety Glasses, 4’ Level, A Safe Ladder, a #2 Pencil
YOU MAY ALSO NEED AN ASSISTANT FOR LARGER AWNINGS. IT DEPENDS ON THE
SIZE AND WEIGHT OF THE AWNING.
NOTE: YOU WILL FIND THAT THE FITTINGS HAVE BEEN PRE-INSTALLED, AS WE HAVE
PRE-ASSEMBLED AND INSPECTED IT FOR YOU IN THE FACTORY.
Chicago should be assembled on the ground
