AWNLUX W5700, Руководство по установке, Страница: 14 / 16

2. Keep CLEAR of openings around adjustable pitch arm assembly while adjusting awning pitch
(slope). Adjustable pitch arm assembly (bottom arm) will telescope. Failure to obey this caution
could result in injury.Do NOT allow corner of entry door to contacts awning fabric. Otherwise,
obrading wear or tearing of awning fabric could be occured.Pull top arm assembly down to lower
FRTA to desired height.While holding top arm assembly in place, tighten adjustable knob to set
pitch (slope).
3. Do NOT allow water to pool or snow to accumulate on awning fabric. Or the awning will become
unstable, and could bend or collapse. When it has heavy rain or snow is expected, place awning
in stowed (closed) position.Lowering one arm assembly into water shed position (to create a
slope from other arm assembly) will allow water run-off during light rain.
a. With awning fully extended, verify top arm assembly nearest entry door is fully extended, and
that adjustable knob is tightened.
b. Pull top arm assembly (farthest from entry door) down until awning slopes approximately 15°
maximum from other arm assembly. After adjusting the tilt angle you want, lock the knob to use
the awning 15° degrees (with the horizontal angle).
13
Pic.17
Pic.18