manualshive.com logo in svg

AWNLUX W5700, Руководство по установке, Страница: 13 / 16

Поделиться
Скачать
AWNLUX W5700 Скачать руководство пользователя страница 13

How to operate awning

OPEN AWNING

Attention:

 Maintain a horizontal distance of at least 2.5m between fully open awning and any 

permanent object. Do NOT face awning toward permanent objects that may interfere with 

awning operation.Failure to obey this caution could result in injury.

Switch Appearance May Vary

Switch instructions

1. With LED light

OPEN: Open the awning 

OFF: 1. Awning will stop when button is released no matter how far awning extend/retracted 

         2. Turn off the LED lights 

COSE: close awning

2. Without LED light:

OPEN: Open the awning

OFF: .Awning will stop when button is released no matter how far awning extend/retracted 

COSE: close awning 

The FRTA (fabric roller tube assembly) will be lower than RV’s awning rail when hardware is fully 

extended. This pitch (slope) will help accommodate water run off. If a steeper pitch is desired, 

the FRTA must be lowered

To lower FRTA:

1. With awning fully extended, loosen adjustable knob on adjustable pitch arm assembly 

(bottom arm).

abjustable knob

Adjustable pitch arm assembly

Adjust Awning Pitch (Optional)

12

Pic.15

Pic.16

Содержание W5700

















Отзывы:

Нет отзывов