AWG I Operating manual I Fittings I
Inductors FD Z2 and Z4
SAFETY INFORMATION
M1088B10 I Rev. 01-02/20
ENGLISH
25 / 40
2
SAFETY INFORMATION
The AWG Inductors FD Z2 and Z4 are in line with the state of the art
as well as the recognised safety regulations. The safety and health
protection requirements have been met. Nevertheless, their use may
give rise to hazards for the user or third parties or cause damage to the
device itself or other material assets.
2.1
General safety notes
The device may only be operated in accordance with these instruc-
tions and in perfect condition.
The operators must have received the necessary training to be able
to handle the device properly.
Unauthorized modifications or the installation of additional compo-
nents not approved by the manufacturer endanger the proper func-
tioning of the device.
– Modifications to the device are prohibited
– Only use accessories approved by the manufacturer
The operator is responsible for safety in the vicinity of the device, in
particular for compliance with the general safety regulations. This
includes ensuring, before switching on the entire extinguishing sys-
tem, that all protective devices are fully in place and functional.
2.2
Safety during operation
Observe all safety rules and protective measures applicable for use
at the place of use.
Make sure the device does not get damaged during transport, in-
stallation, commissioning, operation or maintenance.
The safety regulations laid down in the country-specific service
regulations for firefighters (for example in Germany the Feuerwehr-
dienstvorschrift FwDV) or the corresponding internal company
regulations must be observed.
