AWE Corona Discharge CD10, Инструкция по установке и эксплуатации

Страница: 4 / 30

PRODUCT DESCRIPTION
The Advanced Water Engineering, Inc. corona discharge ozone system consists of two main components:
• Ozone Generator with built-in Air Preparation • Venturi Injector Manifold
Ozone Generator
The ozone generator houses the ozone reaction chamber, power supply and all electrical components
directly related to the production of ozone. Ozone is produced when the feed gas is exposed to a high
voltage electrical current inside the reaction chamber.
Air Preparation
The Advanced Water Engineering, Inc. CD10/AD ozone system is equipped with a heat regenerative
desiccant air
dryer built into the same enclosure. Corona discharge ozone generators are much more
effective, produce more ozone and require far less maintenance if an air preparation unit is included. The
air preparation system lowers the dew point of the feed gas. Moist feed gas (air) will cause nitric acid to
form inside the generator, which decreases ozone production and if not removed, causes corrosion and
eventual failure of the generator’s internal components. The ability of the ozone generator to produce
ozone is drastically reduced as the dew point rises above -55
0
C. The air dryer desiccant material has an
average life expectancy of five years under normal use.