16
Parts
PRIOR TO USE
Unpack the appliance and check that all parts are included. If any part is missing or dam-
aged, contact your dealer immediately. Dispose all packing material according to local regu-
lations.
Fitting the tool
Note!
Disconnect the tool from power supply before changing the application tool or
maintenance. Wear protective gloves while changing the tool.
Follow the procedure above in reverse to remove accessories.
OPERATION
Always hold the tool by insulated gripping surfaces only.
On/Off
1.
Accessory drive spindle
2.
Accessory locking lever
3.
ON/OFF switch
4.
Handle
5.
Speed dial
Lift the accessory locking lever to the top position.
Place the accessory over the drive spindle and position it so that it
suits the angle needed for the application. Make sure that the acces-
sory is sitting flat on the spindle and locking pins.
Lock the accessory locking lever by pushing it downwards.
Turn the tool on by sliding the on/off switch forward.
Turn the tool off by sliding the on/off switch backwards.