Award TDHP8, Руководство пользователя

Страница: 14 / 32

EN - 11
2. INSTALLATION
2.1. Connection to Water Outlet (with
optional drain hose)
In dryer with a heat pump unit, water
accumulates in the water tank during
the drying process. You must empty the
accumulated water after each drying
process . Instead of periodically emptying
the water tank, you can also use the water
drain hose provided with the dryer to
directly drain the water outside.
2.1.1. Connecting the Water Discharge
Hose
1. Pull and take out the end of the hose at the
back of the dryer. Do not use any tools to
take out the hose.
2. Fit one end of the water discharge hose,
which is provided with the dryer, to the slot
from which you have removed the hose.
3.
Fix the other end of the water discharge hose
directly to the water outlet or sink .
ATTENTION: The hose must be
connected in a manner that it cannot be
displaced. If the hose comes out during
water discharge, there might be flooding in
your house.
IMPORTANT: The water discharge
house must be installed at a height of 80
cm maximum.
IMPORTANT: The water discharge
hose must not be bent between the outlet
and the dryer, folded or stepped over.
2
1
3
2.2. Adjusting the Feet
• For the dryer to work with less noise
and vibration, it must be stable and
balanced on its feet. Adjust the feed to
ensure that the dryer is balanced.
• Rotate the feet to the right and to the
left until the dryer is even and stable.
IMPORTANT: Never remove the
adjustable feet.
2.3. Electrical Connection
ATTENTION: There is risk of fire and
electric shock.
• Your dryer is set to 220-240 V and 50
Hz.
• The mains cable of the dryer is
equipped with a special plug. This
plug must be connected to an earthed
socket protected by a fuse of 10
Amperes as indicated on the type plate.
The fuse current rating of the power
line where the outlet is connected must
also be 10 amperes. Consult a qualified
electrician if you do not have such an
outlet or fuse.
• Our company cannot be held
responsible for damages resulting from
usage without earthing.
IMPORTANT:
Operating your dryer at
low voltage values will shorten the service
life and decrease the performance of your
dryer.
2.4. Under Counter Installation
• Leave at least 3 cm of space between
the side and rear walls of the dryer
and the underside of the worktop when
installing your dryer under a counter.
• Assembly / disassembly under the
counter if neccessary must be done by
authorized service.