Award TDHP8, Руководство пользователя, Страница: 12 / 32

EN - 9
• To maintain a temperature that will not harm the
laundry (e.g. to prevent the laundry from catching
fire), a cooling process starts after the heating
process. After this, the programme ends. At the
end of the programme, always remove the laundry
promptly.
• Oil-affected items can ignite spontaneously,
especially when exposed to heat sources such as
in a dryer. The items become warm, causing an
oxidation reaction in oil. Oxidations creates heat. If
the heat cannot escape the items can become hot
enough to catch fire. Piling, stacking or storing oil-
affected items can prevent heat from escaping and
so create a fire hazard.
• If it is unavoidable that fabrics that contain
vegetable or cooking oil or have been contaminated
by hair care products be placed in a dryer
they should first be washed in hot water with
extradetergent - this will reduce, but not eliminate,
the hazard
ATTENTION: Never use the dryer without a lint
filter or with a damaged lint filter.
• Lint filters must be cleaned
after each use
as
indicated in Cleaning the Lint Filter .
• Lint filters must be dried after wet cleaning. Wet
filters might cause malfunction during the drying
process.
• Lint accumulation must not to be allowed around
the dryer (not applicable for dryers intended to be
vented to the exterior of the building)
IMPORTANT: The clearance between the dryer
and the floor should not be reduced with objects such
as carpets, wood or panel, otherwise, sufficient air
intake cannot be ensured for the dryer.