Award MI950 Скачать руководство пользователя страница 58

Страница: 58 / 68

DRIVERS INSTALLATION

Intel Active Management Technology

This driver is used only on MI950AF (with iAMT function).
It will first install the update for “Hotfix for Windows XP
(KB942288-v3)” and Microsoft .NET Frame 3.5 SP1 Setup.

1. Insert the drivers DVD into the DVD drive. Click

Intel

and then

Intel(R) Q45 Chipset Drivers

. Click

Intel(R) IAMT

, then

Intel(R)

SOL/LSM Driver

2. In the welcome screen to the Setup Program, click

Next

to continue. In

the License Agreement screen, click

Yes

accept the terms of the

agreement and proceed with the setup program.

3. In the Readme File Information screen, click

Next

to continue.

4. The next screen is for the Software Update Installation Wizard. It will
install the update for “Hotfix for Windows XP (KB942288-v3). Click

Next

to continue.

5. In the License Agreement screen, click

Next

to agree with the

Microsoft Software License Terms.

6. Setup is complete. Click

Finish

MI950 User’s Manual

Содержание MI950





































































Результаты поиска

Содержание MI950

Отзывы:

Award MI950, Руководство пользователя, Страница: 58 / 68

Результаты поиска

Содержание MI950

Отзывы: