Award H903BG, Руководство пользователя

Страница: 17 / 28

P ositioning
The edges of the hob must be a minimum distance of mm from a side or
rear wall.
750 mm between the highest point of the hob surface (including the burners)
and the underside of any horizontal surface directly above it.
400 mm between the hob surfaces, providing that the underside of the
horizontal surface is in line with the outer edge of the hob. If the underside of
the horizontal surface is lower than 400 mm, then it must be at least 50 mm
away from the outer edges of the hob.
50 mm clearance around the and between the hob surface and any
combustible materials.
45 mm
60
You must have a gap of at least 25 mm and at most 74 mm between
the underneath of the hob and any surface that is below it.
16
o
o
o
o
o
hob
CLEARANCES REQUIRED
WHEN FITTING THE HOB
WITH A COOKER HOOD ABOVE
9
0
0mm
750mm
400mm
400mm
FO 0813
60mm
490mm
in
0
.
0mm
M
2
This hob is to be built into a kitchen unit or 600mm worktop,providing
the following minium distances are allowed;
- An oven must have forced ventilation to install a hob above it.
- Check the dimensions of the oven in the installation manual.
- The cut out size must
815mm
be that
which is indicated.