Awanti BCT115J1B-IS, Инструкция по эксплуатации

Страница: 13 / 48

13
OPERATING YOUR APPLIANCE
Ø
CONTROL PANEL
1
Control Panel Lock Button
6
Rear Burner Selector Button
2 Front Burner Selector Button 7 Power ON / OFF Button
3 Reduce / Decrease ( - ) Button 8 Rear Burner Control Display
4 Timer Selector Button 9 Timer Control Display
5 Add / Increase ( + ) Button 10 Front Burner Control Display
POWER ON / OFF BUTTON
Push this button to turn the cooktop power on or off,
BURNER SELECTOR BUTTONS (FRONT BURNER / REAR BURNER)
Press the appropriate button for the desired burner.
Once pressed the burner display will show the default setting ( 5 = Medium), adjust to the desired
cook temperature using the ( - ) or ( + ). The temperature setting ranges from 0 – 9. The setting will
blink or flash in the display indicating it is in setting mode. Once you have selected the desired
temperature simply press the button for the selected burner or leave the control panel alone for
approximately for 3 seconds, the setting will stop blinking in the display window.
Example of comparable temperature ranges:
0 1 – 2 3 – 4 5 – 6 7 – 8 9
No Heat Low Heat Medium
Low Heat Medium
Heat Medium
High Heat High Heat
AUTOMATIC SHUT OFF TIMER
Press to set a pre-set cook time, press the Timer button and then set the desired cook time using the
( - ) or ( + ) buttons. The default time is 10 minutes.
Press the button for the desired burner (front or rear), then select the desired cook temperature setting
using the ( - ) or ( + ) buttons.
Press the timer button (10 will appear in the display window as 10 minutes is the default), set the
desired cook time by pressing the ( - ) or ( + ) buttons (time ranges between 0 – 99 minutes).
The ( • ) next to the temperature setting in each window will turn on to indicate the timer has been set
for that burner.
Once set, the unit will automatically shut off after the cook time has expired.
HOT SURFACE INDICATOR
After the burner is used and turned off, the display will flash ( H ) to warn that the surface is still hot.
Once the burner and surface has cooled down the ( H ) indicator will turn off automatically.
Each burner will show the ( H ) warning respectively.