AWA TFTD94G Скачать руководство пользователя страница 6

Страница: 6 / 41

OWNERÕS MANUAL

Safety Instructions

NOTES

Do not place the TV where it
might be exposed to dust.

¥ This may cause a fire hazard !

When unpacking or moving the
TV two people will be necessary
to lift it safely.

NOTES

Do not cover the ventilation of the
TV.

¥ This may cause a fire hazard !

Ensure good ventilation around the TV.
The distance between the TV and the
wall should be more than 10cm.

¥ It makes internal temperature

increaseand causes a fire.

Indoor Installation

The violation of this instruction may cause light injuries or
damage of the product.

¥ Take care of danger that may happen under specific condition.

The violation of this instruction may cause
serious injuries and even death.

Disconnect from the main and
remove all connections before
moving.

Only use the TV on a level and stable
surface.

¥ It may fall down or be upset.

* Safety instructions have two kinds of information as illustrated below.

When installing the monitor on a table, be careful
not to place it near the edge.

¥ This may cause the monitor to fall

causing serious injury to a child or adult
and serious damage to the monitor.

¥ Surely use a fitting table or rack.

Do not place the TV close to sources
of steam or oil such as a humidifier.

¥ This may cause a fire hazard

or an electric shock hazard !

WARNING

NOTES

Do not place the TV directly on a carpet, rug or place where ventilation is restricted.

¥ This would cause its internal temperature to increase and might cause a fire hazard !

NOTES

Do not place inflammable
materials beside the TV

¥ This may cause a fire

hazard !

Do not place the TV in direct sunlight or near heat
sources such as radiators, fires and
stove etc.

¥ This may cause a fire hazard !

WARNING

NOTES

Содержание TFTD94G










































Результаты поиска

Содержание TFTD94G

Отзывы:

Бренды по названию

Популярные бренды

AWA TFTD94G, Руководство пользователя

Результаты поиска

Содержание TFTD94G

Отзывы:

Бренды по названию

Популярные бренды