INSTALLATION
-9-
STEPS:
PC
Be sure both the TV and computer are
set to Power off.
1.Connect a VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to PC mode.
4.Power on the PC.
This connection and power-up sequence
is very important.
ANTENNA
Note:
Aerial connections: IEC (female).
Input impedance: 75 unbalanced.
REAR AV Connections
All the terminals are (from left to right):
AC Power input, Antenna socket, VGA input, AV output, PC AUDIO input, Rear Audio input,
YPbPr
, AV1 input, HDMI1 input, HDMI2 input.
Note: 1. AV1 and YPbPr share the Rear Audio input channel.
2. When HDMI1 port receives a DVI signal, the matching audio signal is received by
the PC Audio input.
(component video) input
Plug (not supplied)
Outdoor antenna (not supplied)
For optimum digital TV reception,
the use of high quality shielded 75
coax cable is recommended.
RF INPUT
VGA INPUT
AV
L
R
AV OUTPUT
PC
AUDIO INPUT
HDMI2 INPUT
HDMI1 INPUT
100-240V~ 50/60Hz
AC-INPUT
RF INPUT
VGA INPUT
AV
L
R
AV OUTPUT
PC
AUDIO INPUT
HDMI2 INPUT
HDMI1 INPUT
100-240V~ 50/60Hz
AC-INPUT
VGA and audio cable
not supplied
