AWA JTM19T212-TD, Руководство по эксплуатации

Страница: 15 / 31

USING THE MENUS
14
Color Temperature:
Select a optimum color temperature level(Cool/
Medium/Warm) or Customize by selecting User.
The level of Red, Green and Blue are can be
adjusted separately in user mode.
Aspect Ratio
:
Select a display mode.
Noise Reduction
:
If the broadcast signal received is weak, you can select
this function to reduce the video noise if the option set
the “On”.
1. Press the MENU button on the remote
controller to display the OSD main menu.
2. Press
t
/
u
button to select the PICTURE menu.
3. Press
p
/
q
button to select each item.
4. Press the MENU or EXIT button to exit from the menu.
Picture Mode:
Select a desired picture mode among
Dynamic, Standard,Mild
and
User
.
Dynamic, Standard
and
Mild
are the factory preset picture mode and the parameter of those modes can not be changed. If
you want to adjust any items (e.g. Contrast, Brightness ,Clour and sharpness etc), please select
User
, and the settings will be stored in
User
mode.
C
You may select the picture mode directly by pressing the PMODE button on the remote control.
Contrast:
Adjust the color brightness of the image.
Brightness:
Adjust the darkness and lightness of the image.
Color:
Adjust the saturation level of color.
Sharpness:
Adjust the sharpness level of image.
Tint:
Adjust the tone of color when your system is in NTSC.
PICTURE SETUP
EXIT MENU ENTER
Colour Temperature
Noise Reduction
User
Red
Green
Blue
Aspect Ratio
........... 50
........... 50
........... 50
16:9
On
PICTURE
EXIT
MENU ENTER
PICTURE
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Standard
50
50
50
50
0