06
Preparation For Use
UNPACKING AND SETUP
Carefully remove all the components from the display carton and verify
that you have all the necessary components before you dispose of the
display carton.
Remove all packing materials from the individual components.Remove
any descriptive labels that may be attached to the front panel of the
main unit.Do not remove any labels or stickers on the back panels of
the main unit or the speakers.
Place all the components in the desired location.This system is designed
to be used on level,stable,flat surface such as a table,desk,shelf,or stand,
convenient to an AC outlet,out of direct sunlight, and away from sources
of excess heat,dust,moisture, or vibration.
Unwind the AC power cord on the back of the unit and extend the cord
to its full length.
POWER SOURCE
This system is designed to operate on 240V AC
50Hz house current only. Connecting this
system to any other power source may cause
damage to the system and such damage is not
covered by your warranty.
Note:
The system has an AC plug and will only fit into matching AC outlets.This
is a safety feature to reduce the possibility of electric shock.If the plug will
not fit in your AC outlets,you should have the outlet changed by a qualified,
licensed electrician.Do not use an adapter to make the plug fit into your
outlet.This defeats the safety feature and could expose you to electric shock.
