24
The auxiliary function will only activate when the aux in jack is fitted with
connection cable.
Note:
The connection cables are not included.
- Press the STANDBY button on the main unit or remote control to power
on the unit.
- Press the FUNCTION button on the main unit or remote control to select
AUX function.
- Turn your auxiliary source ‘ On ’ and operate it as usual. The sound from
the auxiliary source will - be heard through the speakers of this system.
- Adjust the VOLUME level controls of this system as desired.
SUBWOOFER OUT (Sub-woofer not supplied with this product)
Connect the Audio Output jacks of your active subwoofer to the
SUBWOOFER OUT jack on the back panel of the unit. Then the unit will
become a 2.1 system and the bass would be able to sound from the external
active subwoofer.
Note:
The connection cables and active subwoofer are not included.
RESETTING
If the system does not have any respond, you may have experienced a severe
electric shock (ESD) or a power surge that triggered the internal computer to
shut down automatically. If this occurs, simply disconnect the main power and
connect the main power again after one minute.
Note:
Although disconnect the power will unlock the internal computer after a
power surge, it will also erase all of the settings. After turning ‘ On ’ the unit,
you will need to reset the settings again.
