Avyna 213, Инструкции по безопасности

Страница: 10 / 32

ASSEMBLY INSTRUCTIONS
ASSEMBLY
The trampoline must be assembled by an aldut in
accordance with the assembly instructions. It is recom-
mended to wear gloves while assembling to prevent
injuries. Before fi rst use the trampoline should be
checked if the trampoline is assembled conform the
manual.
Any modifi cations made by the customer to the original
trampoline (e.g. the adding of an accessory) shall be
carried out according to the instructions of the manu-
facturer.
TRAMPOLINE PLACEMENT
• A minimum of 7.3 meter of overhead clearance is
required. Adequate horizontal clearance must be
maintained from objects and possible hazards inclu-
ding electric power wiring, tree limbs, recreational
structures (swing-sets, swimming pools) and fences.
• The trampoline must be placed on a level surface
before use.
• Never place the trampoline on a hard surface such as
concrete or asphalt.
• There must be no obstructions beneath the trampoline.
• Do not place the trampoline near any other
recreational devices or structures such as a
swimming pool or swing-set.
• This type of trampoline should not be buried in to
the ground.
• In case of using the trampoling in a public place:
only use the trampoline in a controlled environment
and always under supervision.
10