AVYCON H5300 series Скачать руководство пользователя страница 70

Страница: 70 / 192



Following is the key usage found in playback mode. A user may also use the keypad provided on the screen.

Go to Start

• Go to start of recorded data

REW

• Fast backward playback (changes up to x128 with each press)

BACKWARD

• Frame-by-frame reverse still image playback

PLAY

• Playback mode: 1X PLAY

PAUSE

• PAUSE

FORWARD

• Frame-by-frame forward still image playback

• Fast forward playback (changes up to x128 with each press)

Go to End

• Go to end of the recorded data



Press

key to leave the playback mode.

5.2.1 Search



Press

key on the System Menu Bar, or Press Search button on the front of the DVR and the following Search menu will

display.



There are two ways to search video, i.e., by calendar and by event.

Calendar Search: search by using calendar.

Event Search: search by event.



As enter Search mode following will display.



Please Click (



) Calendar to do Calendar Search. (Default display)



Dates and Time with recorded data available will be high-lighted in Red color.

Calendar Search

Содержание H5300 series

































































































































































































Результаты поиска

Содержание H5300 series

Отзывы:

Бренды по названию

Популярные бренды

AVYCON H5300 series, Руководство пользователя

Результаты поиска

Содержание H5300 series

Отзывы:

Бренды по названию

Популярные бренды