AVYCON H5300 series Скачать руководство пользователя страница 164

Страница: 164 / 192

164

: Playback control in DVR Search Mode.

: View a channel in full screen (by selecting a number with ENTER button).

NOTE



For detailed information on PTZ Mode, please refer to 4.3.5 Camera.

11.5.2.3 PTZ Mode



In order to enter PTZ mode, press “Camera ID” + “

“.

NOTE



PTZ Mode only can be switched from DVR Mode.



If the PTZ Mode is selected following will display on Keyboard LCD and OSD



Then, a user should be able to operate the PTZ camera with CP1300.



In PTZ mode, all buttons are operated according to texts written on each button. The functions are same as Front buttons of

DVR as follows:

# + “

“ will move to saved Preset point.

# + “

“ will save new Preset point under #.

Press “

“ to adjust the Focus.

Press “

“ to activate the Zoom.

WARNING



DEPENDING ON THE PROTOCOL BEING USED BY THE SPEED DOME CAMERA, CONTROLLING CAMERA MENU

COULD BE DIFFERENT. PLEASE CHECK SPEED DOME CAMERA MANUAL.

11.5.3 SPD Control Mode (Speed Dome)

11.5.3.1 Connection



If the SPD Control Mode is selected followings will display on Keyboard LCD:

Содержание H5300 series

































































































































































































Результаты поиска

Содержание H5300 series

Отзывы:

Бренды по названию

Популярные бренды

AVYCON H5300 series, Руководство пользователя

Результаты поиска

Содержание H5300 series

Отзывы:

Бренды по названию

Популярные бренды