15
MA Table Settings : This is to set GSM Mobile Outgoing-Call Allowed Table
CR Table Settings : This to set Fixed line Network Outgoing-Call Restricted Table
3) LCR Settings : Least Cost Routing
After the route (either GSM MO or fixed line CO port) is determined upon the Routing
Policy, this product may change the prefix according to next LCR Table to select phone
service type, or one of fixed line CO networks service providers.
The table below is an example to show the setting for LCR Table:
Prefix Range
Delete Digit
(Length)
Transfer
From
To
00
00
3
006
04
08
0
**1807
1806
1809
4
1806
022 028 0
1806
This product will check the prefix of phone number dialed, then delete the digits and
add the transfer digits according to its Prefix Range in LCR Table. Afterward, the
modified phone number will be sent out via the previous determined route (either GSM
MO or fixed line CO port).
LCR operation rule:
Prefix From/To check rule: The prefix dialed is checked according to From/To Prefix
Range digit by digit from the beginning digit. The value of each digit of “To Prefix”
should not be set smaller than that of each digit of “From Prefix” digit by digit. If a
prefix range of “047” ~ “052” needs to be set, it can be done via setting From/To
Prefix of both 047/049(Prefix Range: 047, 048, 049) and 050/052(Prefix Range:
050, 051, 052). The numbering from small to large is
0
,
1
,
2
,
3
,、、、,
9
,
*
,
#.
After checking the prefix range, this product will delete a certain digit(s), according
to associated “delete digit length”, of dialed number from the beginning digit.
Then, this product will insert “Transfer Digit” at the beginning of number to be sent