www.AVuno.com
www.AVuno.com
| Page 7
| Page 6
FUNCTIONS AND CONTROLS
FUNCTIONS AND CONTROLS
REAR PANEL
1
FM COAX
Connection point for the supplied FM antenna.
2
AM LOOP ANT
Connection point for the supplied AM loop antenna.
3
SPEAKER OUTPUT B
Connection point for loudspeakers B, left and right channels.
4
SPEAKER OUTPUT A
Connection point for loudspeakers A, left and right channels.
5
CD
Input for a CD player or similar.
6
DVD
Input for a DVD player or similar.
7
VCR
Input from a video player or similar.
8
AUX / PHONO
Input from an aux line input or a turntable. Selectable via switch (12).
9
REC OUT
Fixed level output not affected by the master volume control ideal for recording purposes.
10
PRE OUT
Used to send the pre amplifier signal to an external device such as an equalizer
or processor. Can also be used to send a signal to an external amplifier.
11
AMP IN
Used to feed the processed signal from the PRE OUT back into the amplifier
Note when not using the PRE OUT / AMP IN facility make sure that the two RCA
bridges are in place..
12
AUX / PHONO
Sets the input level of the AUX/PHONO input (8) to either line or phono level, to facilitate the
use of a turntable.
13
MAINS OUTPUT LEAD
Exit point for the mains lead from the unit.
REMOTE CONTROL
1
VCR / AUX-PHONO / CD / DVD
Allows selection of the relevant music source.
2
A-D / POP / CLASSIC / P+BASS / C+BASS
In tuner mode allows access to a group of presets.
In USB player mode allows selection of preset tonal settings.
3
AUTO / RANDOM
In tuner mode holding this button for a few seconds automatically
scans and stores stations to presets sequentially.
In USB player mode it allows playback of the tracks on the attached
USB device in a random fashion.
4
AM-FM / FOLDER / TRACK
In tuner mode it selects between the AM and FM bands.
In USB player mode it allows you to choose a folder and the tracks within
that folder from an attached USB device.
5
RDS
Displays the RDS information about the radio station you have selected.
6
ID3
Pressing this button gives information about the music you are listening to
on the attached USB device. Pressing this button repeatedly gives you
information such as artist name, track title, album title, folder details and
filenames.
7
MENU
Allows access to the general menu of options within this amplifier.
8
VOL +/-
Adjusts the volume up or down.
9
STANDBY
Switches the unit to standby .or switches it back on from standby.
10
USB/TUNER
Allows selection of the tuner or the USB player.
11
1-8 / JAZZ / ROCK / BASS / BASS 2 / J+BASS / R+BASS / EQ OFF /
REPEAT
In Tuner mode these buttons correspond to the 8 selections available within
the four groups of 8 presets.
In USB player mode buttons 1-6 correspond to preset tonal settings, while
button 7 turns the EQ off and button 8 activates the repeat function. The
REPEAT function allows the repeat of all the tracks, folder repeat or single
track repeat .
12
MEMORY
Used to preset the radio stations.
13
In USB player mode it is used to play or pause the track selected.
14
SCAN + -/
In tuner mode used to search up and down the band. Pressing once
searches one step at a time. Holding it down for 3 seconds makes it
automatically search for stations, stopping when it finds one with sufficient
signal strength.
In USB player mode it moves forward and back through tracks on an
attached USB device.
15
MUTE
This buttons cuts out the volume output, pressing it again restores it.
